MIXER AMPLIFIERS
 

ELECTRICAL SPECIFICATION M1

GENERAL PERFORMANCE SPECIFICATIONS
VOLTAGE GAIN: 20 (±0.25 dB), or Customer Specified. 
FREQUENCY REPONSE: 300Hz to 300KHz, flat within ±0.5dB. Response to 1.0MHz available.
HARMONIC DISTORTION: <0.5% at 2.0 volts RMS output.
TEMPERATURE STABILITY: <±0.25 dB gain change form -40°C to +85°C
INPUT SPECIFICATIONS
INPUT IMPEDANCE: 20K W's nominal.
OUTPUT SPECIFICATIONS
OUTPUT VOLTAGE: >2.0 volts RMS from -40°C to +85°C and any supply voltage within 28 ±6volts
OUTPUT IMPEDANCE: <500 W's
POWER SPECIFICATIONS
POWER REQUIREMENTS: +28 ±6 volts @ 6 ma max
SUPPLY VOLTAGE STABILITY: <±0.1 dB gain change for any supply voltage within 28 ±6 volts.
ENVIROMENTAL SPECIFICATIONS (see below)
 
 
 

ELECTRICAL SPECIFICATION M2

GENERAL PERFORMANCE SPECIFICATIONS
VOLTAGE GAIN: 20 (±0.25 dB), or Customer Specified. 
FREQUENCY REPONSE: 300Hz to 300KHz, flat within ±0.5dB. Response to 1.0MHz available.
HARMONIC DISTORTION: <0.5% at 3.0 volts RMS output.
TEMPERATURE STABILITY: <±0.25 dB gain change form -40°C to +85°C
INPUT SPECIFICATIONS
INPUT IMPEDANCE: 20K W's nominal.
OUTPUT SPECIFICATIONS
OUTPUT VOLTAGE: >3.0 volts RMS from -40°C to +85°C
OUTPUT IMPEDANCE: <500 W's
POWER SPECIFICATIONS
POWER REQUIREMENTS: +28 ±6 volts @ 12 ma max
SUPPLY VOLTAGE STABILITY: <±0.1 dB gain change for any supply voltage within 28 ±6 volts.
ENVIROMENTAL SPECIFICATIONS (see below)
 
 

ENVIRONMENTAL SPECIFICATIONS

SANDARD MIXER AMPLIFIER ENVIRONMENTAL SPECIFICATIONS
ACCELERATION: Gain is stable within ±1%, under constant acceleration of 200g's, in direction of each major axis.
ALTITUDE: Unlimited.
HUMIDITY: Gain is stable within ±1% when exposed to a relative of 95% for tow hours at +50°C.
SHOCK: Gain is stable within ±1%, after a shock of 200g's of 5-millisecond duration, in mjor axis.
TEMPERATURE, OPERATING AND STORAGE: -55°C to +125°C
VIBRATION: Gain is stable within ±1% when subjected to 30g's RMS vibration from 5 to 2000Hz in each major axis.

Back to Products