|
MIXING LINE DRIVERS
|
|
ELECTRICAL SPECIFICATION LD1
|
| GENERAL PERFORMANCE
SPECIFICATIONS |
| VOLTAGE GAIN: |
20 (±0.25dB)
or customer specify. |
| FREQUENCY RESPONSE: |
300Hz to 200KHz
flat within ±0.5dB into 5,000 pF/75 Ohms, 300Hz to 1MHz, flat within
±3.0dB (reference at 10kHz) into 1,000 pF/75 Ohms. |
| HARMONIC DISTORTION: |
0.5% at 2.0 volts
RMS output, @600kHz. |
| TEMPERATURE
STABILITY: |
< ±0.25dB
gain changes from -40°C to +85°C. |
| INPUT SPECIFICATIONS |
| INPUT IMPEDANCE: |
20 K ohms nominal. |
| OUTPUT SPECIFICATIONS |
| OUTPUT VOLTAGE: |
2.0 volts RMS from
-40°C to +85°C and any supply voltage within 28±6 volts
into 75 ohms in parallel with 5000 picofarads. |
| OUTPUT IMPEDANCE: |
< 10 ohms. |
| POWER SPECIFICATIONS |
| POWER REQUIREMENTS: |
+28V±6 volts
@25 ma. max. |
| SUPPLY VOLTAGE
STABILITY: |
<±0.1
dB gain change for any supply voltage within 28±6 volts. |
| ENVIRONMENTAL
SPECIFICATIONS |
| ACCELERATION: |
Gain is stable within
0.5% dB under constant acceleration of 100g in direction of each major
axis. |
| ALTITUDE: |
Gain is stable with
±0.5% dB for unlimited altitude. |
| HUMIDITY: |
Gain is stable within
±0.5 dB when exposed to a relative humidity of 95% for two hours
at +50°C. |
| SHOCK: |
Gain is stable within
±0.1 dB after a shock of 200g, of 10-millisecond duration in each
major axis. |
| TEMPERATURE, OPERATING
AND STORAGE: |
-55°C to +125°C |
| VIBRATION: |
Gain is stable within ±0.5dB
when subjected to 30g RMS vibration from 5 to 2000 Hz in each major axis. |
|
Note: Add Suffix P to Model No. If Output Adj. Pot.
Is desired.
|