PREMODULATION FILTER

MODEL PMF9-LD

DESCRIPTION

THE PMF9-LD PREMODULATION FILTER IS DESIGNED TO SUPPLY ADDITIONAL CURRENT DRIVE FOR LOW IMPEDANCE LOADS (COAX CABLE) AT HIGH BIT RATES. THE PMF9-LD CAN DRIVE A 75 OHM LOAD IN PARALLEL WITH 1000pf AT ±2.5V, 10 MEGA BIT NRZ-L. CONTACT FACTORY FOR INCREASED DRIVE CAPABILITY. THE INPUT LEVEL DETECTOR REMOVES UNDESIRABLE NOISE SPIKES FROM THE PCM DATA PRIOR TO FILTERING.

FEATURES

  • AIRBORNE QUALIFIED
  • HIGH GAIN ACCURACY
    		•
  • THICK-FILM RELIABILITY
    		•
  • HIGH STABILITY
    		•
  • SMALL SIZE
    		•
  • POT AMPLITUDE ADJUST
    		•
  • SMA COAX OUTPUT CONNECTOR
    		•
    POWER REQUIREMENTS
    VOLTAGE: 28 ±4VDC
    CURRENT: 65Ma Nominal
    OVERVOLTAGE: ±40VDC
    SPECIFICATIONS
    TYPE: 6 Pole Bessel
    INPUT: ±10V Maximum (Threshold +1.0 To +3.0VDC), (CMOS ON TTL)
    FREQUENCY: (specify) 5K Bit To 5M Bit NRZ-L
    OUTPUT: (specify) ±2.5VDC Or 0 +5VDC, Pot Standard
    TEMPERATURE RANGE: -40°C To +85°C For Specified Operation

     
     
     

    FOR MORE DETAILED SPECIFICATIONS, CONTACT FACTORY OR LOCAL REPRESENTATIVE
     
     
     
     
     
     

    Back To Premod Filter